Compare Products

Hide

Clear All

VS

RG-AP820-AR(V3) Bezprzewodowo - 1
RG-AP820-AR(V3) Bezprzewodowo - 2
RG-AP820-AR(V3) Bezprzewodowo - 3
RG-AP820-AR(V3) Bezprzewodowo - 4
RG-AP820-AR(V3) Bezprzewodowo - 5
RG-AP820-AR(V3) Bezprzewodowo - 6
RG-AP820-AR(V3) Bezprzewodowo - 7
RG-AP820-AR(V3) Bezprzewodowo - 8
RG-AP820-AR(V3) Bezprzewodowo - 9
RG-AP820-AR(V3) Bezprzewodowo - 10
RG-AP820-AR(V3) Bezprzewodowo - 11
RG-AP820-AR(V3) Bezprzewodowo - 1
RG-AP820-AR(V3) Bezprzewodowo - 2
RG-AP820-AR(V3) Bezprzewodowo - 3
RG-AP820-AR(V3) Bezprzewodowo - 4
RG-AP820-AR(V3) Bezprzewodowo - 5
RG-AP820-AR(V3) Bezprzewodowo - 6
RG-AP820-AR(V3) Bezprzewodowo - 7
RG-AP820-AR(V3) Bezprzewodowo - 8
RG-AP820-AR(V3) Bezprzewodowo - 9
RG-AP820-AR(V3) Bezprzewodowo - 10
RG-AP820-AR(V3) Bezprzewodowo - 11
Picture

RG-AP820-AR(V3), Wi-Fi 6 Tri-Radio 3.843 Gbps Indoor Access Point

Indoor scenarios in the higher education, government, general education, finance, and business sectors

Models
Highlight Features
  • 5 Gbps SFP combo port for flexible networking
  • Seamless client roaming enabled by AI radio
  • Real-Time, full-band scanning for a secure network
  • 160 MHz high bandwidth, 3.843 Gbps high speed with Wi-Fi 6
  • WIS unified cloud management for easy O&M
Sales Enquiry
Key Specification View More
Features

Wi-Fi 6 AR Series Indoor AP
RG-AP820-AR(V3) with Built-in Al Radio

Six spatial streams

Max. data rate: 3.843 Gbps

160 MHz channel width

PoE/DC power supply

Bluetooth 5.1

5 Gbps Combo Port, Flexible Networking

The 5 Gbps SFP port is designed for Ruijie All-Optical i-Share+ Solution, unleashing the bandwidth performance to achieve ultra-gigabit access.
Moreover, one 5 Gbps electrical port is provided for wired connection, maximizing the return on investment (ROI).

Built-in AI Radio, Superior Roaming Experience

The built-in Al radio module can perform real-time client scanning and report the scanning results to the AC. Based on the information, the AC steers clients to connect to nearby APs with stronger signals. This enables optimal signal quality and service continuity for superior roaming experience.
Built-in Al Radio
Average roaming latency < 30 ms
Packet loss rate < 0.5%
Conventional settled APs
Average roaming latency of 300 ms
Packet loss rate of 2%

Real-Time and Full-Band Scanning, High Security

AAl radio enables real-time and full-band scanning to eliminate potential risks compared with timeframe-based and single-band scanning, ensuring high network security.
The secure scanning approach does not consume radio resources for communication, enabling high wireless performance and sound user experience.
24/7 real-time scanning
2.4 GHz/5 GHz full-band scanning
Al Radio safeguarding
Traditional AP safeguarding
Secure scanning
Data transmission

Upgraded to Wi-Fi 6, High-Speed Access at 3.843 Gbps

3.843
Gbps
High Concurrency
OFDMA and MU-MIMO technologies, ensuring concurrent robust connections for multiple clients
High Rate
1024-QAM modulation, 25% higher data transmission rate than 802.11ac
Low Latency
OFDMA technology, reducing latency to 20 ms when data is transmitted to multiple clients simultaneously
High Security
WPA3 encryption protocol, greatly enhancing wireless security

Unified Cloud Management for Easy O&M

WIS Cloud Network enables network-wide configuration and optimization.
It also supports O&M on the mobile app Wi-Fi Moho.
Go to WIS->

Cloud O&M

24/7 Network Optimization

Real-Time Warning

Fault Locating

Specifications

Hardware Specifications

RG-AP820-AR(V3)

802.11n

Six spatial streams

● Radio 1 – 2.4 GHz: 2x2 MIMO, two spatial streams

● Radio 2 – 5 GHz: 2x2 MIMO, two spatial streams

● Radio 3 –2.4 GH/5 GHz: 2x2 MIMO, two spatial streams

Channels:

● Radio 1 – 2.4 GHz: 20 MHz and 40 MHz

● Radio 2 – 5 GHz: 20 MHz and 40 MHz

● Radio 3 –2.4 GH/5 GHz: 20 MHz and 40 MHz

Combined peak data rate: 0.9 Gbps

● Radio 1 – 2.4 GHz: 6.5 Mbps to 300 Mbps (MCS0 to MCS15 )

● Radio 2 – 5 GHz: 6.5 Mbps to 300 Mbps (MCS0 to MCS15)

● Radio 3 – 2.4 GHz/5 GHz: 6.5 Mbps~ 300 Mbps (MCS0 ~ MCS15)

Radio technologies: Orthogonal Frequency-Division Multiplexing (OFDM)

Modulation types: BPSK, QPSK, 16-QAM, 64-QAM

Packet aggregation:

● Aggregate MAC Protocol Data Unit (A-MPDU)

● Aggregate MAC Service Data Unit (A-MSDU)

Dynamic Frequency Selection (DFS)

Cyclic Delay/Shift Diversity (CDD/CSD)

Maximum Ratio Combining (MRC)

Space-Time Block Coding (STBC)

Low-Density Parity Check (LDPC)

Transmit beam-forming (TxBF)

802.11ac

Four spatial streams

● Radio 2 – 5 GHz: 2x2 MIMO, two spatial streams

● Radio 3 – 5 GHz: 2x2 MIMO, two spatial streams

Channels:

● Radio 2 – 5 GHz: 20 MHz, 40 MHz, 80 MHz, and 160 MHz

● Radio 3 – 5 GHz: 20 MHz, 40 MHz, and 80 MHz

Combined peak data rate: 2.6 Gbps

● Radio 2 – 5 GHz: 6.5 Mbps to 1.733 Gbps (MCS0 to MCS9)

● Radio 3 – 5 GHz: 6.5 Mbps to 0.867 Gbps (MCS0 ~ MCS9)

Radio technologies: Orthogonal Frequency-Division Multiplexing (OFDM)

Modulation types: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM

Packet aggregation:

● Aggregate MAC Protocol Data Unit (A-MPDU)

● Aggregate MAC Service Data Unit (A-MSDU)

Dynamic Frequency Selection (DFS)

Cyclic Delay/Shift Diversity (CDD/CSD)

Maximum Ratio Combining (MRC)

Space-Time Block Coding (STBC)

Low-Density Parity Check (LDPC)

Transmit beam-forming (TxBF)

802.11ax

Four spatial streams

● Radio 1 – 2.4 GHz: 2x2 uplink/downlink MU-MIMO, two spatial streams

● Radio 2 – 5 GHz: 2x2 uplink/downlink MU-MIMO, two spatial streams

Channels:

● Radio 1 – 2.4 GHz: 20 MHz and 40 MHz

● Radio 2 – 5 GHz: 20 MHz, 40 MHz, 80 MHz, and 160 MHz

Combined peak data rate: 2.976 Gbps:

● Radio 1 – 2.4 GHz: 8.6 Mbps to 0.574 Gbps (MCS0 to MCS11)

● Radio 2 – 5 GHz: 8.6 Mbps to 2.402 Gbps (MCS0 to MCS11)

Radio technologies: uplink/downlink Orthogonal Frequency-Division Multiple Access (OFDMA) 

Modulation types: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM, 1024-QAM

Packet aggregation:

● Aggregate MAC Protocol Data Unit (A-MPDU)

● Aggregate MAC Service Data Unit (A-MSDU)

Dynamic Frequency Selection (DFS)

Cyclic Delay/Shift Diversity (CDD/CSD)

Maximum Ratio Combining (MRC)

Space-Time Block Coding (STBC)

Low-Density Parity Check (LDPC)

Transmit beam-forming (TxBF)

WPA3

Antenna

Wi-Fi

● 2.4 GHz: two built-in omnidirectional antennas, with peak antenna gain of 5.4 dBi.

● 5 GHz: two built-in omnidirectional antennas, with peak antenna gain of 5.2 dBi.

Bluetooth

● One integrated vertically polarized omnidirectional antenna, with peak antenna gain of 4.6 dBi.

Port

1 x 100/1000/2.5G/5GBase-T port, compliant with IEEE 802.3af/at/bt standard (PoE/PoE+/PoE++)

1 x 5GE SFP/RJ45 combo port, compatibility with 1GE and 2.5GE modules, shared with one 100/1000/2.5G/5GBASE-T port

1 x 10/100/1000Base-T port

1 x RJ45 console port (serial console port)

1 x USB 3.0 (Type-A connector)

1 x Bluetooth 5.1

Status LED

1 x multi-color system status LED

● AP power-on status

● Software initialization status and upgrade status

● Uplink service interface status

● Wireless user online status

● CAPWAP tunnel timeout

● Specific AP locating

Button

1 x Reset button

● Press the button for shorter than 2 seconds. Then the device restarts.

● Press the button for longer than 5 seconds. Then the device restores to factory settings.

Dimensions (W x D x H)

Main unit: 230 mm x 230 mm x 51 mm (9.06 in. x 9.06 in. x 2.01 in.)

Shipping: 284 mm x 262 mm x 124 mm (11.18 in. x 10.31 in. x 4.88 in.)

Weight

Main unit: 1.0 kg (2.2 lbs)

Mounting bracket: 0.1 kg (0.22 lbs)

Shipping: 1.25 kg (2.76 lbs)

Mounting

Wall/Ceiling-mount (a mounting bracket is delivered with the main unit)

Lock option

Kensington lock and securing latch

Input power supply

The AP supports the following two power supply modes:

● 54 V DC/1.1 A power input over DC connector: The DC connector accepts the center-positive circular plug with the inner diameter of 2.1 mm (0.08 in.) or outer diameter of 5.5 mm (0.22 in.) and the length of 9.5 mm (0.37 in.). A DC power supply needs to be purchased independently.

● PoE input over LAN 1: The power source equipment (PSE) complies with IEEE 802.3af/at/bt standard (PoE/PoE+/PoE++).

Note: If both DC power and PoE are available, DC power is preferred.

Maximum power consumption

Maximum power consumption: 40 W

● DC power: 40 W, 2.4 GHz radio 2x2, 5 GHz radio 2x2, LAN 2 for PoE supply, and USB port enabled

● 802.3bt (PoE++): 40 W, 2.4 GHz radio 2x2, 5 GHz radio 2x2, LAN 2 for PoE supply, and USB port enabled

● 802.3at (PoE+): 23 W, 2.4 GHz radio 2x2, 5 GHz radio 2x2, LAN 2 and USB port that fail to provide power for external devices (PoE out disabled of LAN 2 and USB port disabled)

● 802.3af (PoE): 12.95 W, 2.4 GHz radio 1x1, 5 GHz radio 1x1, AI Radio is disabled, LAN 2 and USB port that fail to provide power for external devices (PoE out disabled of LAN 2 and USB port disabled)

● Idle mode: 10.3 W

External power

supply

When powered by 802.3bt (PoE++), the AP can supply power to an external device.

● The USB port can source 1 A/5 W power to an attached device.

● The LAN 2 port can source 48 V/12.95 W power to an IoT unit.

Environment

Storage temperature: –40°C to +70°C (–40°F to +158°F)

Storage humidity: 5% RH to 95% RH (non-condensing)

Storage altitude: –500 m to +5,000 m (–1640.42 ft. to +16,404.20 ft.)

Operating temperature: –10°C to +50°C (14°F to 122°F)

Operating humidity: 5% RH to 95% RH (non-condensing)

Operating altitude: –500 m to +5,000 m (–1640.42 ft. to +16,404.20 ft.)

Note: At an altitude in the range of 2,000–5,000 m (6,561.68–16,404.20 ft.), every time the altitude increases by 166 m (544.62 ft.), the maximum temperature decreases by 1°C (1.8°F).

Mean Time Between Failure (MTBF)

200,000 hours (22 years) at the operating temperature of 25°C (77°F)

System memory

1 GB DRAM, 256 MB flash

Transmit power

2.4 GHz

● Maximum transmit power: 27 dBm (501.19 mW)

● Minimum transmit power: 19 dBm (79.43 mW)

5 GHz

● Maximum transmit power: 26 dBm (398.11 mW)

● Minimum transmit power: 21 dBm (125.89 mW)

Note: The transmit power adjusted in percentage. The transmit power is limited by local regulatory requirements. For details, see WLAN Country or Region Codes and Channel Compliance.

 

The following table lists the radio frequency performance of Wi-Fi including different frequency bands, protocols, and date rates. It is country-specific, and Ruijie Networks reserves the right of interpretation.

Radio Frequency Performance

RG-AP820-AR(V3)

Frequency Band and Protocol

Data Rate

Maximum Transmit Power per Transmit Chain

Maximum Receive Sensitivity per Receive Chain

2.4 GHz, 802.11b

1 Mbps

24 dBm

–91 dBm

2 Mbps

24 dBm

–91 dBm

5.5 Mbps

23 dBm

–90 dBm

11 Mbps

22 dBm

–87 dBm

2.4 GHz, 802.11g

6 Mbps

24 dBm

–89 dBm

24 Mbps

23 dBm

–82 dBm

36 Mbps

23 dBm

–78 dBm

54 Mbps

21 dBm

–72 dBm

2.4 GHz, 802.11n (HT20)

MCS0

24 dBm

–85 dBm

MCS7

20 dBm

–67 dBm

2.4 GHz, 802.11n (HT40)

MCS0

24 dBm

–82 dBm

MCS7

20 dBm

–64 dBm

2.4 GHz, 802.11ax (HE20)

MCS0

24 dBm

–85 dBm

MCS11

16 dBm

–58 dBm

2.4 GHz, 802.11ax (HE40)

MCS0

24 dBm

–82 dBm

MCS11

16 dBm

–54 dBm

5 GHz, 802.11a

6 Mbps

24 dBm

–89 dBm

24 Mbps

23 dBm

–82 dBm

36 Mbps

23 dBm

–78 dBm

54 Mbps

21 dBm

–72 dBm

5 GHz, 802.11n (HT20)

MCS0

24 dBm

–85 dBm

MCS7

20 dBm

–67 dBm

5 GHz, 802.11n (HT40)

MCS0

24 dBm

–82 dBm

MCS7

20 dBm

–64 dBm

5 GHz, 802.11ac (VHT20)

MCS0

24 dBm

–85 dBm

MCS9

18.5 dBm

–60 dBm

5 GHz, 802.11ac (VHT40)

MCS0

24 dBm

–82 dBm

MCS9

18.5 dBm

–57 dBm

5 GHz, 802.11ac (VHT80)

MCS0

24 dBm

–79 dBm

MCS9

18.5 dBm

–53 dBm

5 GHz, 802.11ax (HE20)

MCS0

24 dBm

–85 dBm

MCS11

16 dBm

–58 dBm

5 GHz, 802.11ax (HE40)

MCS0

24 dBm

–82 dBm

MCS11

16 dBm

–54 dBm

5 GHz, 802.11ax (HE80)

MCS0

24 dBm

–79 dBm

MCS11

16 dBm

–52 dBm

5 GHz, 802.11ax (HE160)

MCS0

24 dBm

–76 dBm

MCS11

16 dBm

–49 dBm

 

Note: Available frequency bands may vary with countries or regions. To use the above-mentioned frequency bands, ensure that they are supported in your country or region. For details, see WLAN Country or Region Codes and Channel Compliance.

Software Specifications

RG-AP820-AR(V3)

Basic Function

Applicable software version

RGOS11.9(6)W2B5 or later

WLAN

Maximum number of associated STAs

1,024 (up to 512 STAs per radio)

Maximum number of BSSIDs

32 (up to 16 BSSIDs per radio)

Maximum number of WLAN IDs

16

STA management

SSID hiding

Band steering

Each SSID can be configured with the authentication mode, encryption mechanism, and VLAN attributes independently.

Remote Intelligent Perception Technology (RIPT)

Intelligent STA identification technology

Intelligent load balancing based on the STA quantity, traffic, and frequency band

Rate set settings

STA limiting

SSID-based STA limiting

Radio-based STA limiting

Bandwidth limiting

STA/SSID/AP-based rate limiting

CAPWAP

IPv4/IPv6 CAPWAP

Layer 2 and Layer 3 topology between an AP and an AC

An AP can automatically discover the accessible AC.

An AP can be automatically upgraded through the AC.

An AP can automatically download the configuration file from the AC.

CAPWAP through NAT

MTU setting and fragmentation over CAPWAP tunnels

Encryption over CAPWAP data channels

Encryption over CAPWAP control channels

Data forwarding

Centralized and local forwarding

Wireless roaming

Layer 2 and Layer 3 roaming

Wireless locating

MU and TAG device locating

Security and Authentication

Authentication and encryption

Remote Authentication Dial-In User Service (RADIUS)

EXEC authorization, specifying the source IP address of RADIUS packets, and built-in authentication server

PSK and web authentication

QR code-based guest authentication, SMS authentication, and MAC address bypass (MAB) authentication

Data encryption: WEP (64/128 bits), WPA (TKIP), WPA-PSK, WPA2 (AES), WPA3-Enterprise, WPA3-Individual

Data frame filtering

Allowlist, static blocklist, and dynamic blocklist

WIDS

Wireless Intrusion Detection System(WIDS)

User isolation

Rogue AP detection and containment

ACL

IP standard ACL, MAC extended ACL, IP extended ACL, and expert-level ACL

IPv6 ACL

Time range-based ACL

ACL based on a Layer 2 interface

ACL based on a Layer 3 interface

Ingress ACL based on a wireless interface

ACL Remark

Dynamic ACL assignment based on 802.1X authentication (used with the AC)

CPP

CPU Protect Policy (CPP)

NFPP

Network Foundation Protection Policy (NFPP)

Routing and Switching

MAC

Static and filtered MAC addresses

MAC address table size: 2,048

Maximum number of static MAC addresses: 2,048

Maximum number of filtered MAC addresses: 2,048

Ethernet

Jumbo frame length: 1,518

Full-duplex and half-duplex modes of interfaces

IEEE802.1p and IEEE802.1Q

Optical module information display, alarms about faults, and diagnosis parameter measurement (QSFP+/SFP+/SFP)

VLAN

Interface-based VLAN assignment

Maximum number of SVIs: 200

Maximum number of VLANs: 4,094

VLAN ID range: 1–4,094

ARP

ARP entry aging, gratuitous ARP learning, and proxy ARP

Maximum number of ARP entries: 2,048

ARP check

IPv4 services

Static and DHCP-assigned IPv4 addresses

NAT, FTP ALG and DNS ALG

IPv6 services

IPv6 addressing, Neighbor Discovery (ND), ICMPv6, IPv6 ping

IPv6 DHCP client

IP routing

IPv4/IPv6 static route

Maximum number of static IPv4 routes: 1,024

Maximum number of static IPv6 routes: 1,000

Multicast

Multicast-to-unicast conversion

VPN

PPPoE client

IPsec VPN

Network Management and Monitoring

Network management

NTP server and NTP client

SNTP client

SNMPv1/v2C/v3

Fault detection and alarm

Information statistics and logging

Network management platform

Web management (Eweb)

User access management

Telnet, SSH, FTP client, FTP server, and TFTP client

Switchover among Fat, Fit, and cloud modes

When the AP works in Fit mode, it can be switched to Fat mode through an AC.

When the AP works in Fat mode, it can be switched to Fit mode through the console port or Telnet mode.

When the AP works in cloud mode, it can be managed through Ruijie Cloud.

 

The following value-added software functions can be achieved with the WIS solution (used with RG-iData-WIS and wireless controller).

Value-added Software

RG-AP820-AR(V3)

Intelligent O&M

Experience

Network operation analysis, such as device stability and signal coverage

Measuring users' network experience based on indicators such as the latency, packet loss, signal strength, and channel utilization, and visualizing results of the network experience

Statistics on the number of online and offline failures of STAs associated with different APs, average signal strength, and other parameters

VIP monitoring and alarm, and custom alarm thresholds

STA global experience map and experience coverage evaluation based on the time range

STA access protocol replay and fine-grained STA fault diagnosis

Note: To support the preceding functions, ensure that the AP works in Fit mode.

Network optimization

Network performance optimization, including one-click network optimization and scenario-based optimization

Client steering to cope with roaming stickiness, and experience indicator comparison

Client steering to cope with remote association, and experience indicator comparison

One-click diagnosis – analyzing problems and providing suggestions

Big data

Baseline analysis – recording the configuration, version, and other changes, and tracking network KPI changes

Time capsule – analyzing the device version and configuration change history

Regional analysis

Batch generation of building floor information – uploading floor plans, and dragging and dropping AP positions

One-click report

One-click health report – generating a report on the overall operation of a network

Security radar

Unauthorized Wi-Fi signal location, presentation by category, and containment

Cloud Management

Management and maintenance

Uniformly connecting, managing, and maintaining APs, ACs, and other devices, batch device configuration and upgrade, and other functions

Deployment through Zero Touch Provisioning (ZTP) – creating configuration templates and automatically applying configured templates

One-click discovery of the wired and wireless network topology and topology generation

Cloud Authentication

Authentication mode

SMS authentication, fixed account authentication, one-click authentication, Facebook authentication, Instagram authentication, voucher authentication, and other authentication modes

Authentication implemented in the cloud, without the need to deploy the local authentication server

Customized portal

Customized Portal authentication page for mobile phones and PCs

SMS gateway

Interconnection with SMS gateways of GUODULINK and Alibaba Cloud

Platform Capabilities

Big data capabilities

Mainstream persistence solutions based on Hadoop, MongoDB, and MySQL, providing distributed storage capabilities

Spark-based big data computing capabilities

Data warehouse building based on Hive, and data model conversion, integration, and other functions

Hierarchy and decentralization

Authorizing different applications for different users to meet service needs of different departments

Granting operation permissions to administrators in different scenarios

System management

Account operation, authorization configuration, email configuration, configuration backup, exception alarms, and other system management functions

Note: For details, refer to the latest hybrid cloud management solution.



Regulatory Compliance

RG-AP820-AR(V3)

Regulatory compliance

EN 55032, EN 55035, EN 61000-3-3, EN IEC 61000-3-2, EN 301 489-1, EN 301 489-3, EN 301 489-17, EN 300 328, EN 301 893, EN 300 440, FCC Part 15, EN IEC 62311, IEC 62368-1, and EN 62368-1

* For more country-specific regulatory information and approvals, contact your local sales agency.

Show More
Resources All Resources
Learn about Products or Solutions
Installation
Software and Configuration
Order Information

Model

Description

RG-AP820-AR(V3)

Wi-Fi 6 (802.11ax-compliant) indoor high-density wireless access point

Tri-radio, six spatial streams, peak data rate of 3.843 Gbps

●     Radio 1: 2.4 GHz: two spatial streams, 2x2 MU-MIMO, peak data rate of 574 Mbps

●     Radio 2: 5 GHz: two spatial streams, 2x2 MU-MIMO, peak data rate of 2.402 Gbps

●     Radio 3: 2.4 GHz/5 GHz: two spatial streams, 2x2 MIMO, 2.4 GHz peak data rate of 0.3 Gbps, 5 GHz peak data rate of 0.867 Gbps

802.11a/b/g/n/ac/ax, switching between Fat, Fit, and cloud modes, and 802.3af/at/bt PoE and local DC power supply

Note:

●     The power source equipment (PSE) needs to be purchased separately.

●     The DC power supply needs to be purchased separately, and the output voltage/current must be 54 V/1.1 A.

Show More
Tips: Product information and performance will be affected by upgrade iteration, specific environment and other factors, so FAQ content is for reference only. For further information, please contact online support.
How would you rate your experience on this page?
Very disatisfying
Very satisfying
If you would like to offer more comment, please type in the textbox below, that would be helpful for the improvement of this page.
Submit
Thank you for your feedback!

Ruijie Networks websites use cookies to deliver and improve the website experience.

See our cookie policy for further details on how we use cookies and how to change your cookie settings.

Cookie Manager

When you visit any website, the website will store or retrieve the information on your browser. This process is mostly in the form of cookies. Such information may involve your personal information, preferences or equipment, and is mainly used to enable the website to provide services in accordance with your expectations. Such information usually does not directly identify your personal information, but it can provide you with a more personalized network experience. We fully respect your privacy, so you can choose not to allow certain types of cookies. You only need to click on the names of different cookie categories to learn more and change the default settings. However, blocking certain types of cookies may affect your website experience and the services we can provide you.

  • Performance cookies

    Through this type of cookie, we can count website visits and traffic sources in order to evaluate and improve the performance of our website. This type of cookie can also help us understand the popularity of the page and the activity of visitors on the site. All information collected by such cookies will be aggregated to ensure the anonymity of the information. If you do not allow such cookies, we will have no way of knowing when you visited our website, and we will not be able to monitor website performance.

  • Essential cookies

    This type of cookie is necessary for the normal operation of the website and cannot be turned off in our system. Usually, they are only set for the actions you do, which are equivalent to service requests, such as setting your privacy preferences, logging in, or filling out forms. You can set your browser to block or remind you of such cookies, but certain functions of the website will not be available. Such cookies do not store any personally identifiable information.

Accept All

View Cookie Policy Details

Dane kontaktowe

Dane kontaktowe

How can we help you?

Dane kontaktowe

Get an Order help

Dane kontaktowe

Get a tech support